The aperture value to simulate typical daylight (outdoor) conditions is 50. The aperture value to simulate typical daylight (indoor) conditions is 30. Setting the value to less than 20 will result in a very bright scene, suitable for night conditions. The closer the number is to 0, the more light will be let into the lens, to carry on the aperture metaphor. Different lighting/weather conditions can change the actual indoor and outdoor aperture values. Experiment and test to be sure.
Description
Sets custom eye accommodation camera aperture.
Note
If HDR is enabled, when setAperture
valueis used it also forces setApertureNew to the following values: [value,value,value, 1]. Execute setApertureNew after setAperture to override this default mechanic.
Important
The aperture is set to default by the engine at the mission start. If you set it before the mission started it will reset like it never happened. Make sure you set it at the right time (see #Example 2).
Syntax
setAperture aperture
Parameters:
aperture: Number - aperture value; a value will set the aperture automatically. Maximum value which has an effect seems to be100.
Returns: Nothing
Examples
Example 1
setAperture 0.3;
Example 2
0 spawn { sleep 0.1; setAperture 100 };
See also
setApertureNew · apertureParams